how to make a dildo rocker

Hey friend,

I recently decided to make a dildo rocker, and I’m here to tell you all about my experience. To start off this project, I had purchased all the necessary components, such as a motor, gears, and a few other mechanical parts. After gathering all of these materials, I could start the assembly process.

First and foremost, I had to start by making sure that the motor was properly fixed in place and connected to the gears. This was the most important part of the project because if the motor wasn’t connected correctly, the entire rocker wouldn’t move. To make sure that I do this part correctly, I slowly tightened the screws, one-by-one, so that the motor could be firmly attached and secure.

Once that step was complete, I moved onto the next step which was assembling the frame for the dildo rocker. This part was probably the most challenging because I had to make sure that the rocker was strong enough to support the motor and gears. For this part, I used two wooden slats which I had cut into the respective measurements and connected them together with screws.

The third part was connecting the gears and motor to the frame. To do this, I had to place the gears and motor in the correct positions so that when the motor was turned on, sex dolls the gears would start to turn and move the frame. To achieve this, I used a few nuts and screws to hold the gears and motor vibrators in place.

The fourth part was building the actual rocker, which would allow the dildo to move up and down. To make this part of the rocker, I used a few pieces of wood which I had cut into a specific shape. I then used some nuts and bolts to secure the wood together and to attach the rocker to the frame.

The fifth and final step was connecting the dildo to the rocker. This part was quite straightforward, as I just had to attach the dildo to one of the ends of the rocker and secure it with some screws. Once everything was securely attached, I could turn on the motor and the rocker would start to move up and down.

To finish up this project, I had to just place the entire dildo rocker in an appropriate position and to make sure that all the connections and screws were tight and secure. After that, it was time for the finale, which was testing out the dildo and seeing if it moved as desired. Sure enough, it did move just as expected and I was quite pleased with the results.

I know it may seem complicated at first, but making a dildo rocker is actually quite simple. All you need is the right materials, patience, and creativity in order to assemble the perfect rocking mechanism. Hopefully, this article has provided you with some insight on how to create your own dildo rocker. Good luck!